PLASTIC & INJECTION MOLDING
Hydraulic power for Hydra-Jaws™ and Hydra-Latch™
POWER & CONTROL MODULES
Hydraulic Power and Control Modules are made in a variety of configurations to optimize all QMC applications. From single valve (zone) carriables to multi-zone units we've got just what you need to get the job done.
- Hydra-Mechanical clamps are hydraulically actuated and mechanically locked during molding operations and need to be re-pressurized in order for the mechanical locks to be released. The HM feature provides a booster to make unlocking simple and easy.
- Hydra-Latch™ Only - Choose a single hydraulic circuit (1 zone) carriable module for convenient use and storage. Great for single or multiple systems.
- Hydra-Jaws™ Only - Choose a two hydraulic circuit (2 zone) carriable or roll-around module for greater fluid volume and convenience. (Typically one hydraulic circuit is connected to the 'A' platen and the other to the 'B' platen to power hydra-mechanical clamps.
- Hydra-Jaws™ and Hydra-Latch™ Combination - Choose a three hydraulic circuit (3 zone) module when hydraulic clamping and KO Bar quick connect/disconnect systems are used.
MODEL
CONFIGURATION OPTIONS
C
Carriable
R
Roll-Around
HM
Hydra-Mechanical Clamps
KO
Knockout Bar Connect/Disconnect System
COMMON SPECIFICATIONS
Air inlet pressure 150 psi maximum/70 psi minimum recommended
Oil temperature range of 50˚-120˚F
All hydraulic circuit/hose fittings are JIC 37 flare 7/16 thread
Air filter/regulator is pre-set to approximately 70 psi for 5,000 psi hydraulic pressure output to the clamps
Second regulator is adjustable to select hydraulic pressure in the range of 1,000-5,000 psi
0-10,000 psi gauges for each circuit except electrically actuated module (not shown)
Hydraulic valves are low friction with metal to metal seals and a check valves to isolate each hydraulic circuit
Enclosures are made of steel and can be easily opened to make regulator setting changes
Power & Control Modules
105C-KO
One Zone One Hydraulic Circuit
This module is most often used as a carriable unit to power Hydra-Latch™ Quick KO Bar Connect/Disconnect systems located on several machines. This module may also be fixed mounted (105S-KO) for dedicated use on a specific machine.
Weight: 25 lbs.
Pedestal/Base:
Reservoir Capacity: 2 1/2 qts.
Dimensions:
Cabinet Only: 21"L x 10"W x 16"H
Pedestal/Base: 29"H
Bracket: 14"L x 9"W x 11"H
125C-HM
Two Zone Two Hydraulic Circuits
This carriable (125C-HM) module is most often used to supply hydraulic power to mold clamps which are mechanically locked during molding operations. Two circuits are available, one each for the 'A' and 'B' platens. This module can also be placed on a stationary mount for dedicated operation on a specific machine (125S-HM).
Weight: 46 lbs.
Reservoir Capacity: 2 1/2 qts.
Dimensions:
Cabinet Only: 21"L x 10"W x 16"H
Pedestal/Base: 29"H
Bracket: 14"L x 9"W x 11"H
120R-HM
Two Zone Two Hydraulic Circuits
This module is most often used to supply hydraulic power to mold clamps which are mechanically locked during molding operations. Two circuits are available, one each for the 'A' and 'B' platens. The module is placed on a pedestal attached to a base with easy rolling casters. This module can also be placed on a customer supplied mount (120S-HM) or a shelf bracket (120B-HM).
Weight:
Cabinet: 55 lbs.
Total: 105 lbs.
Reservoir Capacity: 2 1/2 qts.
Dimensions:
Cabinet Only: 21"L x 10"W x 16"H
Pedestal/Base with Casters: 34"H
130R-HM-KO
Three Zone Three Hydraulic Circuits
This module is most often used to supply hydraulic power to mold clamps which are mechanically locked during molding operations. Two circuits are available, one each for the 'A' and 'B' platens. A third hydraulic circuit is added to supply hydraulic pressure to Hydra-Latch™ KO Bar Quick Connect/Disconnect Systems. The module is placed on a pedestal attached to a base with easy rolling casters. This module can also be placed on a customer supplied mount (130S-HM) or a shelf bracket (130B-HM).
Weight:
Cabinet: 60 lbs.
Total: 110 lbs.
Reservoir Capacity: 2 1/2 qts.
Dimensions:
Cabinet Only: 21"L x 10"W x 16"H
Pedestal/Base with Casters: 34"H